Micromachined accelerometers for inertial navigation applicationsCHAE, Junseok; KULAH, Haluk; NAJAFI, Khalil et al.SAE transactions. 2005, Vol 114, Num 2, pp 120-126, issn 0096-736X, 7 p.Article

Optimizing tool-path generation for three-axis machining of a sculptured impeller blade surfaceFAN, H.-Z; XI, G.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2012, Vol 226, Num 1, pp 43-51, issn 0954-4054, 9 p.Article

On the instantaneous acceleration of points in a rigid bodySELIG, J. M.Mechanism and machine theory. 2011, Vol 46, Num 10, pp 1522-1535, issn 0094-114X, 14 p.Article

Design of large-displacement compliant joints : Mechanical design of compliant microsystemsTREASE, Brian P; MOON, Yong-Mo; KOTA, Sridhar et al.Journal of mechanical design (1990). 2005, Vol 127, Num 4, pp 788-798, issn 1050-0472, 11 p.Article

Influence du jerk sur le comportement dynamique d'un robot cartésien 3 axes = Jerk time influence on residual vibration and movement time of a 3-axis Cartesian robotBEAREE, Richard; BARRE, Pierre-Jean; DUMETZ, Eric et al.Mécanique & industries. 2005, Vol 6, Num 4, pp 439-445, issn 1296-2139, 7 p.Conference Paper

Improvement of vector compensation method for vehicle magnetic distortion fieldHONGFENG PANG; QI ZHANG; JI LI et al.Journal of magnetism and magnetic materials. 2014, Vol 353, pp 1-5, issn 0304-8853, 5 p.Article

SIMULATION OF CUTTING FORCES FOR COMPLEX SURFACES IN BALL-END MILLINGSMAOUI, M; BOUAZIZ, Z; ZGHAL, A et al.International journal of simulation modelling. 2008, Vol 7, Num 2, pp 93-105, issn 1726-4529, 13 p.Article

Double ballbar test for the rotary axes of five-axis CNC machine toolsLEI, W. T; SUNG, M. P; LIU, W. L et al.International journal of machine tools & manufacture. 2007, Vol 47, Num 2, pp 273-285, issn 0890-6955, 13 p.Article

Concave edge-based part decomposition for hybrid rapid prototypingHU, Zhu; LEE, Kunwoo.International journal of machine tools & manufacture. 2005, Vol 45, Num 1, pp 35-42, issn 0890-6955, 8 p.Article

Real-time attitude estimation techniques applied to a four rotor helicopterEARL, Matthew G; D'ANDREA, Raffaello.IEEE Conference on Decision and Control. 2004, isbn 0-7803-8682-5, Vol 4, 3956-3961Conference Paper

Modelling and design issues of a 3-axis parallel machine-toolCOMPANY, O; PIERROT, F.Mechanism and machine theory. 2002, Vol 37, Num 11, pp 1325-1345, issn 0094-114XArticle

STEP-based automatic system for recognising design and manufacturing featuresNAGARAJAN, S; VENKATA REDDY, N.International journal of production research. 2010, Vol 48, Num 1, pp 117-144, issn 0020-7543, 28 p.Article

A three-axis displacement sensor with nanometric resolutionGAO, W; KIMURA, A.CIRP annals. 2007, Vol 56, Num 1, pp 529-532, issn 0007-8506, 4 p.Conference Paper

Introduction à l'énergie éolienne : L'Energie éolienne = Basics on wind energy : Wind energyPALUCH, Bernard.REE. Revue de l'électricité et de l'électronique. 2005, Num 5, pp 35-50, issn 1265-6534, 16 p.Article

Fertigung gefräster Prototypen optimieren = Milled prototyping optimizationBERGERS, Diethard; ASSMANN, Olaf; LOBECK, Frank et al.VDI-Z. 2003, Vol 145, Num NOV, pp 27-29, issn 0042-1766, 3 p., NSArticle

Fast inverse offset computation using polygon rendering hardwareINUI, Masatomo.Computer-aided design. 2003, Vol 35, Num 2, pp 191-201, issn 0010-4485, 11 p.Article

A surface based approach for constant scallop height tool-path generationTOURNIER, C; DUC, E.International journal, advanced manufacturing technology. 2002, Vol 19, Num 5, pp 318-324, issn 0268-3768Article

Constant scallop-height tool path generation for three-axis sculptured surface machiningFENG, Hsi-Yung; HUIWEN LI.Computer-aided design. 2002, Vol 34, Num 9, pp 647-654, issn 0010-4485Article

WebCAD: a computer aided design tool constrained with explicit 'design for manufacturability' rules for computer numerical control millingMOHOLE, A; WRIGHT, P; SEQUIN, C et al.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2002, Vol 216, Num 6, pp 879-889, issn 0954-4054Article

An Acoustic Emission-Based Method for Determining Contact Between a Tool and Workpiece at the Microscale : MicromanufacturingBOURNE, Keith A; JUN, Martin B. G; KAPOOR, Shiv G et al.Journal of manufacturing science and engineering. 2008, Vol 130, Num 3, issn 1087-1357, 031101.1-031101.8Article

Development of a medical CAD/CAM system for orthopedic surgeryMITSUISHI, M; SUGITA, N; TANIMOTO, K et al.CIRP annals. 2007, Vol 56, Num 1, pp 405-410, issn 0007-8506, 6 p.Conference Paper

The 3-PRS parallel spindle module with multi-posture vertical and horizontal machining capabilityHUANG, Y. M; CHENG, X; GAO, F et al.International journal of production research. 2005, Vol 43, Num 3, pp 465-470, issn 0020-7543, 6 p.Article

Magnetic attitude control for satellitesGRAVDAHL, Jan Tommy.IEEE Conference on Decision and Control. 2004, isbn 0-7803-8682-5, Vol 1, 261-266Conference Paper

Rapid volumetric calibration of coordinate measuring machines using a hole bar artefactLIM, C. K; BURDEKIN, M.Proceedings of the Institution of Mechanical Engineers. Part B. Journal of engineering manufacture. 2002, Vol 216, Num 8, pp 1083-1093, issn 0954-4054Article

Model-based mechanical and control design of a three-axis platformRODRIGUEZ-FORTUN, J. M; ORUS, J; ALFONSO, J et al.Mechatronics (Oxford). 2012, Vol 22, Num 7, pp 958-969, issn 0957-4158, 12 p.Article